Chapin 63980 Bedienerhandbuch PDF herunterladen (Seite 7)

SPRAYER COMPONENTS & USE INFORMATION, Continued

O-ring

Wand

Retaining Nut

Shut-off

Valve

WAND ASSEMBLY

1. Make sure the o-ring is installed on the end of the wand. Insert the wand into shut-off valve.

2. Turn and tighten the retaining nut clock-wise onto the shut-off valve.

The top of the shoulder straps are attached to the tank.

Attach the lower end of the straps by clipping the strap hooks to the

metal frame between where the frame exits the tank and curves around.

INSTALLING THE SHOULDER STRAP

Figure 1

Stage 1

(Filter

basket)

3 STAGE FILTERING SYSTEM

Stage 2

(Removable

In-Tank Filter

Pressure

Cylinder

This backpack sprayer is equipped with a 3 stage ﬁltering system (see ﬁgure

1). Stage 1 is a ﬁlter basket incorporated into the tank opening where ﬂuid is

added. Stage 2 ﬁlter is located at the inlet of the pressure cylinder. Stage 2

is a removable In-Tank ﬁlter. Stage 3 is a removable ﬁlter incorporated into

the shut-off assembly. Periodic cleaning of these ﬁlters is recommended to

insure consistent ﬂuid ﬂow through the sprayer. This will also reduce sprayer

component wear.

The stage 3 ﬁlter is a removable ﬁlter incorporated into the inlet side of the

shut-off valve (see section “disassembling and repairing the shut-off valve”) .

Make sure pressure is released before detaching the hose from the shut-off.

It is best to have no or minimal ﬂuid in the pressure cylinder before removing

and reinstalling the stage 3 shut-off ﬁlter as ﬂuid can leak from the hose.

Stage 3

(removable

Shut-off ﬁlter)

Figure 2 Stage 2 (removable In-Tank ﬁlter)

Guide edge facing away from

pressure cylinder

Guide edge on pressure

cylinder

1 2 3 4 5 6 7 8 9 10 11 12 ... 35 36

Kommentare zu diesen Handbüchern

Keine Kommentare

Chapin 63980 Bedienerhandbuch Seite 7

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Spritzpistolen Chapin 63980